Hare Krishna Environment LLP

A 230 L Diethylene Glycol (DEG) liquid chemical is a colorless, viscous, and slightly sweet-tasting liquid packaged in a 230-liter drum, commonly used in industrial applications. It is a versatile solvent and chemical intermediate with properties like being hygroscopic (attracts moisture) and miscible with water and other organic solvents. Uses include antifreeze, plasticizers, and as a humectant in products like tobacco and printing inks. 

A 200 Kg batch of methyl acetate industrial solvent is a high-purity (>99%is greater than 99 %>99%) organic ester used in various industries like paints, coatings, adhesives, and pharmaceuticals. Key properties include a fast evaporation rate, a pleasant fruity odor, and solubility in water and other organic substances. It is supplied in 200 kg quantities (often in a 200 L drum) and should be stored at room temperature. 

A 200 L Mix Xylene liquid chemical is an industrial-grade solvent packaged in a 200-liter drum, consisting of a colorless, flammable liquid with a sweet odor that is a mixture of ortho-, meta-, and para-xylene isomers. It is commonly used as a solvent in the production of paints, inks, and rubber, and in the chemical synthesis of other materials. 

A 1 L C9 Solvent Liquid is a colorless to pale yellow, aromatic hydrocarbon liquid with a strong odor that is used as a solvent and diluent in industries like paints, coatings, and adhesives. Its properties include a boiling point range of approximately 150−190∘C150 minus 190 raised to the composed with power cap C150−190∘𝐶 and a flash point between 40−50∘C40 minus 50 raised to the composed with power cap C40−50∘𝐶, making it flammable. C9 solvent is insoluble in water but dissolves in most organic solvents. 

Food and beverage

• Flavoring agent: Adds a tart or sour taste to drinks, candies, and other products.
• Preservative: Inhibits microbial growth and slows oxidation to extend shelf life.
• Flavor balancer: Adjusts the sweetness-acidity ratio in products like savory snacks.
• pH control: Regulates the acidity of powdered beverages and other products. 

Monoethylene glycol (MEG) is a colorless, viscous liquid used as a precursor for polyester fibers and in antifreeze and coolants. It is produced from ethylene via ethylene oxide and is known for its ability to lower the freezing point of water and its excellent heat transfer properties. While a valuable industrial chemical, MEG is also toxic if ingested

Monoethylene Glycol (MEG) is a colorless, odorless, viscous liquid with a sweet taste and low volatility, miscible with water and many organic compounds. Its primary uses are as a raw material for polyester fibers and resins (like PET) and as an antifreeze and coolant. MEG is also used in applications like deicing fluids, heat transfer fluids, and as a humectant in some products, though it is toxic if ingested and requires careful handling with appropriate safety gear. 

A 200 L container of nitrobenzene is a pale yellow, oily liquid with a chemical formula of C6H5NO2cap C sub 6 cap H sub 5 cap N cap O sub 2𝐶6𝐻5𝑁𝑂2 and an almond-like odor. It is used in both industrial applications and as an agricultural growth stimulant, though it is highly toxic. Key properties include a density of about 1.20 g/cm31.20 g/cm cubed1.20 g/cm3, a melting point of 5.7∘C5.7 raised to the composed with power C5.7∘C, and a boiling point of approximately 210∘C210 raised to the composed with power C210∘C. 

Mono Ethylene Glycol (MEG) is a clear, colorless, odorless, and slightly viscous organic liquid used primarily in the production of polyester fibers and as the main component in automotive antifreeze and coolants. It is miscible with water and many organic solvents and is a key ingredient for making polyethylene terephthalate (PET) for textiles and bottles. 

Mono Ethylene Glycol (MEG) is a clear, colorless, odorless, and slightly viscous organic liquid used primarily in the production of polyester fibers and as the main component in automotive antifreeze and coolants. It is miscible with water and many organic solvents and is a key ingredient for making polyethylene terephthalate (PET) for textiles and bottles. 

A 200 L container of Dimethyl Sulfoxide (DMSO) liquid is a colorless, polar aprotic solvent with a chemical formula of C2H6OScap C sub 2 cap H sub 6 cap O cap S𝐶2𝐻6𝑂𝑆 and a density of approximately 1.1 g/cm31.1 g/cm cubed1.1 g/cm3. It has a boiling point of 189∘C189 raised to the composed with power cap C189∘𝐶 and a melting point of 19∘C19 raised to the composed with power cap C19∘𝐶, a slight garlic-like odor, and is miscible with water. This bulk quantity is commonly used in pharmaceutical, industrial, and laboratory applications as a versatile solvent. 

Application: Ortho nitro xylene is widely used in agro chemical industries.
It is also used in Bio-Products of agro chemicals.